!
也想出现在这里? 联系我们
广告位
当前位置:首页>教程分享>服务器教程>服务器CENTOS7.X系统根目录分区扩容

服务器CENTOS7.X系统根目录分区扩容

说明:系统版本为 Linux version 3.10.0-327.el7.x86_64

step1. 查看现有磁盘信息,可以看出根分区有45G

[root@8ahk ~]# df -h
Filesystem                              Size  Used Avail Use% Mounted on/dev/mapper/CentOS_mb--centos7-root   45G  9.8G   35G  23% /devtmpfs                             5.9G     0  5.9G   0% /dev
tmpfs                                5.9G   84K  5.9G   1%  /dev/shm
tmpfs                                5.9G  8.9M  5.9G   1%  /run
tmpfs                                5.9G     0  5.9G   0%  /sys/fs/cgroup/dev/sda1                            497M  142M  356M  29% /boot
tmpfs                                1.2G   16K  1.2G   1%  /run/user/42tmpfs                                1.2G     0  1.2G   0% /run/user/0

step2. 查看新增加的磁盘信息

[root@8ahk ~]# fdisk -l

Disk /dev/sda: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000e0945

   Device Boot      Start         End      Blocks   Id  System/dev/sda1   *        2048     1026047      512000   83  Linux/dev/sda2         1026048   104857599    51915776   8e  Linux LVM

Disk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/centos_mb--centos7-root: 47.7 GB, 47747956736 bytes, 93257728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/centos_mb--centos7-swap: 5368 MB, 5368709120 bytes, 10485760 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

step3. 根据以上信息,对新增加的磁盘进行分区

[root@8ahk ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x232defba.

Command (m for help): pDisk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x232defba

   Device Boot      Start         End      Blocks   Id  System

Command (m for help): nPartition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
select (default p): pPartition number (1-4, default 1): 1First sector (2048-209715199, default 2048): 
Using default value 2048Last sector, +sectors or +size{K,M,G} (2048-209715199, default 209715199): 
Using default value 209715199Partition 1 of type Linux and of size 100 GiB is set

Command (m for help): tselected partition 1Hex code (type L to list all codes): L 0  Empty           24  NEC DOS         81  Minix / old Lin bf  Solaris        
 1  FAT12           27  Hidden NTFS Win 82  Linux swap / So c1  DRDOS/sec (FAT- 2  XENIX root      39  Plan 9          83  Linux           c4  DRDOS/sec (FAT- 3  XENIX usr       3c  PartitionMagic  84  OS/2 hidden C:  c6  DRDOS/sec (FAT- 4  FAT16 <32M      40  Venix 80286     85  Linux extended  c7  Syrinx         
 5  Extended        41  PPC PReP Boot   86  NTFS volume set da  Non-FS data    
 6  FAT16           42  SFS             87  NTFS volume set db  CP/M / CTOS / . 7  HPFS/NTFS/exFAT 4d  QNX4.x          88  Linux plaintext de  Dell Utility   
 8  AIX             4e  QNX4.x 2nd part 8e  Linux LVM       df  BootIt         
 9  AIX bootable    4f  QNX4.x 3rd part 93  Amoeba          e1  DOS access     
 a  OS/2 Boot Manag 50  OnTrack DM      94  Amoeba BBT      e3  DOS R/O        
 b  W95 FAT32       51  OnTrack DM6 Aux 9f  BSD/OS          e4  SpeedStor      
 c  W95 FAT32 (LBA) 52  CP/M            a0  IBM Thinkpad hi eb  BeOS fs        
 e  W95 FAT16 (LBA) 53  OnTrack DM6 Aux a5  FreeBSD         ee  GPT            
 f  W95 Ext\'d (LBA) 54  OnTrackDM6      a6  OpenBSD         ef  EFI (FAT-12/16/10  OPUS            55  EZ-Drive        a7  NeXTSTEP        f0  Linux/PA-RISC b11  Hidden FAT12    56  Golden Bow      a8  Darwin UFS      f1  SpeedStor      
12  Compaq diagnost 5c  Priam Edisk     a9  NetBSD          f4  SpeedStor      
14  Hidden FAT16 <3 61  SpeedStor       ab  Darwin boot     f2  DOS secondary  
16  Hidden FAT16    63  GNU HURD or Sys af  HFS / HFS+      fb  VMware VMFS    
17  Hidden HPFS/NTF 64  Novell Netware  b7  BSDI fs         fc  VMware VMKCORE 
18  AST SmartSleep  65  Novell Netware  b8  BSDI swap       fd  Linux raid auto
1b  Hidden W95 FAT3 70  DiskSecure Mult bb  Boot Wizard hid fe  LANstep        
1c  Hidden W95 FAT3 75  PC/IX           be  Solaris boot    ff  BBT            
1e  Hidden W95 FAT1 80  Old Minix      
Hex code (type L to list all codes): 8eChanged type of partition \'Linux\' to \'Linux LVM\'Command (m for help): pDisk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x232defba

   Device Boot      Start         End      Blocks   Id  System/dev/sdb1            2048   209715199   104856576   8e  Linux LVM

Command (m for help): wThe partition table has been altered!Calling ioctl() to re-read partition table.
Syncing disks.

step4. 创建物理卷

[root@8ahk ~]# pvcreate /dev/sdb1
  Physical volume \"/dev/sdb1\" successfully created

step5. 查看物理卷信息

[root@8ahk ~]# pvdisplay  --- Physical volume ---
  PV Name               /dev/sda2
  VG Name               centos_mb-centos7
  PV Size               49.51 GiB / not usable 3.00 MiB
  Allocatable           yes 
  PE Size               4.00 MiB
  Total PE              12674
  Free PE               10
  Allocated PE          12664
  PV UUID               8WbgjB-T1Lf-kqUD-qPFw-UwJu-B9Lc-GAUTUB   
  \"/dev/sdb1\" is a new physical volume of \"100.00 GiB\"
  --- NEW Physical volume ---
  PV Name               /dev/sdb1
  VG Name               
  PV Size               100.00 GiB
  Allocatable           NO
  PE Size               0   
  Total PE              0
  Free PE               0
  Allocated PE          0
  PV UUID               HOknRs-TnMy-wtfX-sGqD-5RK9-dk9q-ze13fj

 

 

[root@8ahk ~]# vgdisplay  --- Volume group ---
  VG Name               centos_mb-centos7
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  3
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size          &a

给TA打赏
共{{data.count}}人
人已打赏
服务器教程

云服务器关于linux的/etc/init.d目录

2021-4-17 20:58:55

服务器教程

服务器LINUX下PHP安装MCRYPT扩展

2021-4-17 20:58:58

声明 本站上的部份代码及教程来源于互联网,仅供网友学习交流,若您喜欢本文可附上原文链接随意转载。无意侵害您的权益,请发送邮件至 [email protected] 或点击右侧 私信:吉吉国王 反馈,我们将尽快处理。
0 条回复 A文章作者 M管理员
    暂无讨论,说说你的看法吧
个人中心
购物车
优惠劵
今日签到
有新私信 私信列表
搜索
OneEase